Slate Tile Patterns

David Artsmith  -  Slate is one of the most exciting materials you can use to create a floor pattern. A durable, natural material, it comes in a wide variety of colors ranging from the subdued, to the outrageous. Slate can also be multicolored, which means that each tile has several different tones mixing and matching in their surface. When working with multicolored slate tile, no two tiles ever look exactly alike; instead they have a subtle underlying consistency which makes up the flow of the stone.

Texture is another important characteristic to consider when dealing with slate patterns. There are many different types of texture available including

Clefted: This natural finish is dimensional and raw

Honed: This finish is achieved by grinding the stone down until it is smooth and flat

Polished: This is the finish that most closely resembles marble, and will actually give the slate a slight sheen

Brushed: This is just like clefted except the points and ridges have been softened

Each one provides a different personality, and will have a different influence on the final pattern you create. While most suppliers will not have every color available in every finish, it is often possible to get a fabricator to apply the finish you desire to existing stone tiles.

Before you begin, it is important that you lay out your design on graph paper. You can do this by taking very accurate measurements of all of the properties of the room, and then scaling them down to grids on your graph paper. If you have a relatively square room this can be easy, but if it has more than four walls, or if the walls are set at uneven angles, you may have to use a protractor to recreate the space accurately. Make several copies of the rooms layout so that you can play around with a variety of designs, without having to redraw them eah time.

When laying out slate tile designs, draw them onto transparent paper, and then lay them over the surface of your graph paper. This allows you to move them around the space, and try out different angles. When drawing the tiles, be sure to compensate for the extra space that is taken up by grout lines.

You should try a dry run before you actually install the tiles, to ensure that your math and diagrams are accurate. Try laying out a few tile rows without grout, at perpendiular angles, leaving space for where the grout would be. This will help you determine whether your spacing is accurate. If the design you are creating is complex, you may want to lay out the entire floor without grout just to see what it will look like.

Since slate tiles have such distinctive personalities, you will often want to lay them out before hand anyways, just to get an idea of the kind of pattern you want to create. The way you lay darker tiles in respect to lighter ones, or similar colors set against different tones, will determine the beauty of the final slate floor you achieve. Dimensional qualities can also be taken into account. One of the most important things to remember in this process is that you want to achieve a certain balance between all of the features found within the stone.

Related posts:

1. Mistakes on Laying Tiles in Your Toilet If you happen to make your mind up to place...
2. How Do I Replace Rotten Underlayment When Remodeling A Tile Shower? I am remodeling a shower/tub area. I removed the...
3. Marble Tiles Manufacturing Basics Normal 0 Marble tiles have always been one of...
4. We Are Remodeling Our Bathroom And Have Asbestos Tile In It. How Do We Remove It? We are remodeling our bathroom and while we were tearing...
5. Bathroom Remodel Photos The various amounts of bathroom remodel photos would most probably...

Related posts brought to you by Yet Another Related Posts Plugin.